Your Hunt for the Best PC Hardware Starts Here

In-depth reviews, breaking news, and CPU cooler comparisons — all from an enthusiast who lives and breathes PC hardware.

Browse Reviews
Close-up of a large black CPU air cooler with stacked metal fins and heat pipes, illuminated with blue lighting, dark moody tech desk background

How to choose a case with good cable routing

A first PC build can feel straightforward until the motherboard, power supply and graphics card are installed. Cable management is often treated as a cosmetic task, yet it affects airflow, access to components, panel fit and future upgrades. A case with sensible routing features can make the build calmer and help prevent expensive mistakes.

Good cable management begins with the chassis rather than the builder’s patience. Look for space behind the motherboard tray, clear cable channels, strong tie points, flexible grommets and enough room for the power supply leads. These details matter whether you are assembling a compact gaming PC in a Sydney apartment or a larger workstation in a Melbourne home office.

Why cable routing matters

Untidy cables can obstruct front intake fans, press against fan blades or sit directly over hot graphics card components. A clean rear compartment keeps wiring away from the main airflow path and makes it easier to inspect the system when troubleshooting. It also reduces the chance of sharply bending a connector or trapping a wire beneath an expansion card.

Cable routing is particularly important for first-time builders because modern PCs may contain several separate connections. The motherboard can need a 24-pin cable and one or two CPU power leads, while the graphics card may use multiple PCIe or 12V-2x6 connections. Add front-panel switches, USB ports, audio, storage drives and case fans, and a poorly designed case quickly becomes difficult to manage.

Start with the motherboard and power supply

Before buying a case, check its motherboard compatibility and the location of the CPU power cut-out. A useful opening near the top-left corner lets you route the EPS cable behind the tray before installing the motherboard. Without that opening, the cable may need to cross the board’s surface or be threaded around the CPU cooler, producing a strained and awkward installation.

The power supply position also affects the entire build. A bottom-mounted PSU with a separate shroud usually provides a cleaner route for thick cables, while a removable PSU bracket can make installation easier in tight cases. Fully modular power supplies are helpful because unused leads can stay in the box. Semi-modular and fixed-cable models can still work well, provided the rear compartment has enough depth.

Measure the PSU length, including its cables and any front-mounted drive cage. Some compact cases leave very little room between the power supply and a hard-drive tray. That can force cables into sharp bends, especially when using a long unit rated for a high-end GPU.

Inspect the rear cable chamber

Case specifications often mention “cable management space”, but the number alone does not tell the whole story. Around 20mm can be workable for a simple system, while 25mm or more gives a first-time builder much greater freedom. Thick 24-pin motherboard cables may need extra room, particularly where the side panel curves inward.

Look for broad routing channels rather than one narrow trench. Integrated Velcro straps are faster to use than disposable zip ties, and multiple tie points let you bundle cables close to their destination. Rubber grommets should stay attached when cables are pulled through them; loose inserts can become frustrating during assembly.

The side panel is a practical test. A case may look spacious until the rear cables are bundled together. Tempered glass panels can hide some clutter, but they do not create additional clearance. A steel rear panel with a slight bulge is often more forgiving than a flat panel that must be forced into position. For a hands-on example of how layout and noise considerations interact, this Silent Base 802 review is useful reference material.

Match the chassis to your hardware

ATX mid-towers are generally the easiest starting point because they provide room around the motherboard, power supply and graphics card. Micro-ATX cases can offer excellent value, though the smaller interior makes cable sequencing more important. Mini-ITX designs demand careful planning and may require short cables, SFX power supplies or a particular installation order.

Check graphics card length and thickness rather than relying on the case’s headline compatibility figure. A front radiator, fan bracket or drive cage can reduce available GPU clearance. Newer graphics cards may also have large power connectors that need gentle side clearance. The cable should not be bent tightly against the side panel immediately after it leaves the GPU.

CPU cooler height matters as well. A large air cooler can occupy much of the space behind the top edge of the motherboard, making the CPU power lead difficult to route. If you are comparing cases for a powerful gaming processor, check cooler clearance and the position of the top fan or radiator mounts together.

Consider airflow and Australian conditions

Cable routing should support the case’s airflow design. A mesh front panel and unobstructed intake area are useful in warm climates, including Brisbane and Perth during summer. Internal wiring should be tied close to the motherboard tray so it does not interrupt the path from front or bottom intake fans to the CPU cooler and graphics card.

Dust is another everyday consideration. Homes near busy roads, pets and carpeted rooms can load filters quickly. A case with removable front and bottom filters is easier to maintain than one requiring a full side-panel removal. Leave enough slack to remove filters and fans without disconnecting half the system.

Room temperature also affects fan behaviour. A PC kept in a small, enclosed desk compartment may run hotter than the same system on an open desktop, regardless of cable quality. Make sure the rear exhaust has space to breathe, and avoid routing cables across an intake fan simply because the path looks shorter.

Build in the right order

Cable management is easiest when planned before every component is secured. Install the power supply and route its main cables first, then fit the motherboard while leaving the 24-pin, CPU power and front-panel leads accessible. Feed each cable through the nearest opening rather than pulling everything through one large gap.

Connect the CPU power cable before installing a tall air cooler or top radiator. Plug the front-panel connectors in while the board edge is visible, then route them behind the tray. Fan and RGB cables should be gathered into a hub where possible, but confirm that the hub has power and motherboard headers in suitable locations.

Do not pull every cable tight at the start. Leave a little service slack near connectors so a component can be removed later without cutting all the ties. A few reusable Velcro straps are safer during testing than permanent zip ties. Once the PC posts and temperatures look normal, tidy the final bundle and close the panels gently.

Judge features against the price

A higher price does not guarantee better cable management. Some affordable cases provide deep rear clearance, excellent Velcro straps and a removable front panel, while premium models may prioritise glass, lighting or unusual styling. Read internal dimension diagrams and detailed reviews instead of judging the exterior alone.

Pay attention to front I/O cables, fan controllers and included accessories. A case with four pre-installed fans may require several connections, while a built-in controller can reduce motherboard header demand but add another cable behind the tray. USB-C on the front panel is convenient, though the case needs the correct internal motherboard header to use it.

Australian buyers should also consider local stock, warranty handling and the Australian Consumer Law. A cheaper imported chassis may become poor value if a damaged panel or faulty front I/O board is difficult to replace. Retailers such as Scorptec, PCCaseGear and MSY often list dimensions and compatibility details, but independent testing can reveal whether panels actually fit after cabling.

Use a simple case selection checklist

Before purchasing, verify the motherboard format, GPU length with front fans installed, CPU cooler height, PSU length and radiator support. Then inspect the rear chamber depth, number of tie points, grommet placement and whether the side panel offers extra bulge clearance. These checks are more useful than choosing a case based solely on its advertised volume.

Think about the next upgrade as well. A case that comfortably fits today’s graphics card may struggle with a thicker replacement or newer power connector. Extra room around the GPU, a clear route to the top of the motherboard and a removable drive cage can extend the useful life of the chassis.

Finally, use real build reports to compare experiences from people with similar hardware. The Hardware Hounds forums can provide practical discussion about case layouts, component fit and cable-routing problems that specifications may not reveal. A well-designed case will not eliminate every fiddly step, but it gives a first-time builder enough space and access to complete the build neatly, safely and with fewer surprises.