Your Hunt for the Best PC Hardware Starts Here

In-depth reviews, breaking news, and CPU cooler comparisons — all from an enthusiast who lives and breathes PC hardware.

Browse Reviews
Close-up of a large black CPU air cooler with stacked metal fins and heat pipes, illuminated with blue lighting, dark moody tech desk background

Choosing the best monitor arm for two 32-inch displays

A dual-screen home office built around two 32-inch monitors can deliver an impressive amount of workspace, but it also places greater demands on the desk and mounting hardware. Large panels are heavier, deeper and harder to position than typical 24-inch office screens, especially when both displays need to sit at the same height with their inner edges close together.

The best monitor arm for dual 32-inch displays is therefore not simply the model with the highest advertised weight limit. The clamp, pole, VESA plate, tilt joint, desk clearance and adjustment range all matter. Australian buyers also need to consider local availability, Australian dollar pricing, GST, return policies and the variety of desks used in apartments, rented homes and dedicated studies.

What two 32-inch monitors demand

A 32-inch monitor usually weighs between about 6 and 12 kilograms without its stand, although ultrawide-style models, thick gaming displays and large curved screens can exceed that range. A dual arm rated for two 9 kg monitors may be suitable for lightweight office panels but marginal for two heavy 4K screens. Weight ratings should be checked per arm rather than treated as a combined total.

Depth is just as important as mass. Two large displays mounted side by side create a wide arc, and the arms need enough reach to pull the screens forward while keeping the rear of the desk accessible. A shallow desk can make a long arm feel unstable, while a deep desk may require additional extension to bring the monitors into a comfortable viewing position.

The mounting plate must support the correct VESA pattern, usually 100 x 100 mm on 32-inch displays. Check the monitor’s actual weight with the stand removed, then leave a safety margin. Gas-spring arms perform best when the display weight sits comfortably inside their adjustment range; a joint operating at its limit may slowly droop or become difficult to fine-tune.

Clamp, grommet and desk stability

A heavy-duty desk clamp is the easiest installation for most home offices. It attaches to the rear edge without drilling and can be moved when the room layout changes. A broad clamp plate spreads pressure more effectively than a small metal bracket, which is particularly useful on laminated particleboard desks common in Australian rental properties and flat-pack workspaces.

A grommet mount can be more stable when the desk has a suitable cable hole. It passes through the desktop and distributes force over a larger area, reducing the chance of the arm twisting when both monitors are extended. However, drilling a clean hole is inconvenient for renters in Sydney or Melbourne apartments, and some desks have drawers, support rails or cable trays blocking the underside.

Desk construction deserves close attention. A thin desktop can flex under a large dual mount even when the clamp itself is well made. A reinforcing plate above or below the desk can spread the load, while a rubber pad protects the finish and helps prevent movement. Avoid clamping over a hollow section or directly above a weak cable-management cut-out.

Arms worth considering in the Australian market

For premium builds, Ergotron’s HX range is a strong candidate, particularly when paired with the manufacturer’s appropriate dual-monitor accessory or configuration. It offers smooth movement, a solid clamp and a refined finish, though the total cost can be high in Australia. It is worth checking the exact model’s capacity because different HX configurations have different limits and may require a heavy-duty pivot for large screens.

The Ergotron LX dual arm is better suited to lighter 32-inch displays. It can work well with slim office monitors, but buyers should measure the screen weight rather than assuming every 32-inch panel is supported. A properly balanced LX setup can be excellent for productivity, while two bulky gaming monitors may call for a heavier model.

Value-focused buyers will find dual gas-spring arms from brands such as Brateck, North Bayou and VIVO through Australian computer retailers and marketplaces. Local stock commonly appears at retailers such as Scorptec, PCCaseGear and Centre Com, while Officeworks and JB Hi-Fi may carry simpler monitor-mounting options. Prices vary, but a realistic Australian budget is roughly $100 to $250 for a capable mid-range dual arm and $300 or more for premium hardware.

The cheaper category can be perfectly serviceable, but quality varies between models that look almost identical. Examine the clamp thickness, warranty, replacement hardware and published per-arm capacity. Reviews that mention drooping, stiff tilt joints or poor cable covers are more useful than a high number printed on the product page.

Positioning large screens for comfortable work

Two 32-inch displays are usually most comfortable with their top edges level and the primary screen directly in front of the user. If one monitor is used for email, chat or reference material, it can be angled inward by around 15 to 25 degrees. This reduces head movement without forcing both panels into an aggressive curve.

The ideal viewing distance depends on resolution and text scaling, but many users will prefer roughly 70 to 90 centimetres from the screen. A 4K 32-inch monitor can display sharp text at comfortable scaling, while a 1440p model may need a slightly greater distance or larger interface settings. The arm should have enough forward and backward travel to accommodate both sitting positions.

Height adjustment is often more important than rotation. The upper third of the main display should sit near eye level, allowing the user to look straight ahead rather than tilting the head upward. Heavy screens can expose weak tilt mechanisms, so a mount with a firm pivot and a wide adjustment range is preferable to one that only offers smooth horizontal movement.

Large curved monitors create a special problem because their mounting point may sit farther forward than expected. When two curved screens meet, the centre can project toward the user while the outer edges sit farther back. A crossbar-style mount or independent arms with long adjustment tracks can make alignment easier than two short fixed-position arms.

Cable routing and everyday usability

A monitor arm should keep power and display cables moving freely as the screens are adjusted. Cable channels built into the arms are helpful, but narrow clips may not accept thick DisplayPort, HDMI or USB-C cables. Leave enough slack at each joint and avoid tightly bending cables near the monitor socket, where repeated movement can cause intermittent faults.

The setup should also leave room for a keyboard, speakers and a laptop dock. On a 140 cm desk, two 32-inch displays can consume most of the usable width once their bezels and viewing angles are accounted for. A central pole may save space compared with two separate bases, but the pole’s footprint and clamp position still need to avoid drawers and rear cable trays.

Thermal comfort matters in Australian summers. A desk positioned near a sunny window in Brisbane, Perth or Adelaide can become noticeably warmer, and monitors with large rear vents should not be pressed against a wall or tightly enclosed by shelving. An arm helps create clearance behind the screens, improving access to ports and allowing heat to dissipate.

Monitor-arm performance follows the same principle as other PC hardware: specifications need to be tested against the actual use case. A practical comparison mindset, similar to reviewing cooler comparison charts, means considering stability, noise-free movement, adjustment range and long-term value instead of relying on one headline number.

Buying checklist and long-term value

Before ordering, record the weight of each monitor without its factory stand, the VESA pattern, the desk thickness and the available rear clearance. Measure the combined width of both screens with their desired angle, then confirm that the arm can place the panels at least 70 cm forward if needed. This prevents the common mistake of buying a mount that technically supports the monitors but cannot position them comfortably.

Look for a clamp rated for the desk’s thickness, a steel or reinforced aluminium structure, replaceable VESA screws and clear instructions. A gas-spring adjustment system should hold position without constant tightening. Tension adjustment is valuable when upgrading later from lightweight office displays to heavier 4K or high-refresh gaming panels.

Australian warranty support can justify spending more. A locally supplied mount may cost extra compared with an imported marketplace product, but replacement parts and returns are generally easier to manage. Check whether the advertised price includes GST and whether the retailer covers damaged hardware or missing fittings. This is especially useful when ordering during major sales periods such as EOFY or Black Friday.

For a straightforward dual-32-inch office, a well-built heavy-duty dual gas-spring arm is usually the sensible balance of price and flexibility. Premium Ergotron hardware suits users who adjust their screens frequently or want a polished long-term installation, while budget mounts are viable when monitor weights are modest and the desk is structurally strong. The best choice reflects the complete workspace, a purchasing approach consistent with the testing focus described by Hardware Hounds.